Imagine being able
to Hay, Grain, and Water your horse without having to enter the
stall, saving valuable time and eliminating the inconvenience.
Our swing out combination feeder and utility door units can upgrade
your stall system appearance and versatility at minimal cost and
effort.
Swing Out Utility Door
Save tons of time and labor with our uniquely designed swing
out utility door. Made of heavy duty 1/8" steel plate mounted
on a sturdy angle iron frame. Measures 22" H x 20" W.
Designed to accommodate a wide variety of feeders, buckets, bucket
holders, or our Thermo Bucket. Heavy duty latch is designed so
that the door cannot be opened from the inside. Can be installed
to swing out from the left or right by simply inverting the frame.
Shipping wt 30 lbs. View Installation
Instructions
 |
Steel Swing Out Utility Door. Model CM 122 (Door shown with mounted Thermo Bucket not included) Paint color black. $99.00 Click here to Order On-line This item can ship to your residence FREE! |
Swing Out Combination Feeder
The feeder is pivoted on a sturdy angle iron frame that is
symmetrically designed so it can be used on either the left or
right hand side of the stall by simply inverting the frame. The
feeder is constructed of heavy duty 16 gauge hot rolled steel
with a removable polyethylene feed pan and 1/4" rod trimming
on all exposed edges to eliminate sharp edges. The internal hay
rack is welded 7/16" hot rolled steel rod. Measures 37"
H x 22" W.
Shipping wt. 62 lbs. View Installation
Instructions
 |
Steel Swing Out Combination Feeder Model CM 121 (Paint color black) $170.00 Click here to Order On-line This item can ship to your residence FREE! |
Galvanized units are made of corrosion resistant galvanized steel, with a removable polyethylene feed pan. Dimensions are the same as steel units. Aluminum provides all of the benefits of above steel units plus, the benefits of maintenance and corrosion free aluminum.
 |
Swing Out Utility Door Aluminum Model CM 222 $160.00 Click here to Order On-line Galvanized Model CM 322. $125.00 Click here to Order On-line These items can ship to your residence FREE! |
 |
Thermo Bucket.. Aluminum Model TB 2 $129.00 Click here to Order On-line Galvanized Model TB 3.. $99.00 Click here to Order On-line These items can ship to your residence FREE! |
 |
Swing Out Combination Feeder .Aluminum Model CM 221 $310.00 Click here to Order On-line Galvanized Model CM 321 $230.00 Click here to Order On-line These items can ship to your residence FREE! |
 |
Wall Model Hay Rack Model CM 212. • Top opening is 2 feet wide x 1 foot deep. Unit is 2
feet high. $45.00 Click here to Order On-line This item can ship to your residence FREE! |
 |
Combination Feeder Model CM 2125. One feeder for both jobs -hay and grain • For the corral or stall. $105.00 Click here to Order On-line This item can ship to your residence FREE! |
 |
Corner Model Hay Rack Model CM 213 Maximize stall Space with this heavy duty Hay Rack • Rugged welded construction $45.00 Click here to Order On-line This item can ship to your residence FREE! |
Cast Aluminum Feeders
Extremely heavy duty cast aluminum provides the toughest structure, yet is light in weight. You get both the advantages of plastic (corrosion prevention) and steel (high strength) with cast aluminum. With horses and other live stock, RUGGED CONSTRUCTION is a must. Both feeders have spherical shaped bottoms which causes the feed to flow to a single low point allowing easy clean up by the animal. If you have grown tired of constantly replacing the rubber and plastic feeders, here is the one-time solution!
 |
• Holds up to 3 gallons $95.00 Click here to Order On-line This item can ship to your residence FREE! |
 |
• Holds up to 3 gallons $95.00 Click here to Order On-line This item can ship to your residence FREE! |
 |
CM 34L Feed Saver Lid for Corner Feeders Stops the annoying and the wasteful habit some horses have of slinging their grain out of the feeder and onto the floor! The center opening is 5 3/4" wide. The steel bars are welded in place onto the heavy steel frame. Each Feed Saver Lid comes with 2 hold down brackets to attach to the feeder mounting hardware, but allows for easy cleaning. Designed to fit our cast aluminum corner feeders only. $14.00 ea. Click here to Order On-line This item can ship to your residence FREE! |
 |
CM 33L Feed Saver Lid for Wall Feeders Stops the annoying and the wasteful habit some horses have of slinging their grain out of the feeder and onto the floor! The center opening is 6" wide. The steel bars are welded in place onto the heavy steel frame. Each Feed Saver Lid comes with 2 hold down brackets to attach to the feeder mounting hardware, but allows for easy cleaning. Designed to fit our cast aluminum wall feeders only. $14.00 ea. Click here to Order On-line This item can ship to your residence FREE! |
Mineral Block Holders
Both Mineral Holders have the same basic heavy duty design to
accept either one, or two, standard blocks of salt or mineral.
Two mounting holes are located to provide rigid mounting and protect
against either upward or downward force that may occur. The double
block holder dimensions are approximately 10 in. x 7 in. x 3 in.
and the single holder 5 in. x 7 in. x 3 in.
 |
Single Block Mineral Holder CM 35 • Weight approximately 3 lbs. $28.00 Click here to Order On-line This item can ship to your residence FREE! |
 |
Double Block Mineral Holder CM 36 • Weight approximately 5 lbs. $35.00 Click here to Order On-line This item can ship to your residence FREE! |