|
Horse Stall Door- 51 inch wide x 7 ft high CM 50 (galvanized
steel framework only, lumber not included) 4 ft. wide grill is
34" high x 1" round tubes inserted, on 4" centers,
into channels top & bottom. Tubes free-float in the channels
for easy replacement and our no-weld construction provides superior
corrosion resistance. (door latch and top brackets not included,
see sliding door hardware kit below)
Color- Silver
$239.00 Add
To Cart
Horse Stall Door CM50H with Swingout Section- The same great
features as our CM50 shown above, but this door features a swing
out section for a "gossip door". The opening can positioned
centered or offset to either side. The opening will be 19"
wide when open and can be locked back with the spring-loaded
latch.
Color- Silver
$339.00 Add
To Cart
|
|
Galvanized Horse Stall Grill (4 ft. section) CM 52 4 ft. wide
grill is 34" high x 1" round tubes inserted, on 4"
centers, into channels top & bottom. Tubes free-float in
the channels for easy replacement and our no-weld construction
provides superior corrosion resistance.
Color- Silver
$179.00 Add
To Cart
|
 |
Galvanized Swing-out grill section CM 52H 4 ft grill section
with a swing-out section allows you to create a gossip door or
a swing-out feed door. Tubes free-float on the assembly for easy
replacement and our no-weld construction provides superior corrosion
resistance. Simply leave out four tubes from your grill and attach
the brackets to your lumber.
Color- Silver
$279.00 Add
To Cart
|
 |
Galvanized Horse Stall Grill (4 ft. section) CM 53 4 ft. wide
grill is 34" high x 1" round tubes inserted, on 4"
centers, into channels top & bottom. Tubes free-float in
the channels for easy replacement and our no-weld construction
provides superior corrosion resistance. This grill has a feed
opening measuring 10 inches x 10 inches.
Color- Silver
$179.00 Add
To Cart
|
 |
7 ft. long wall channel CM54. Removable side stall walls
can be made using our 7 ft. long wall channel designed to accept
standard 2 inch lumber (1 1/2 inch thick). Attach the wall channels
to your support posts or walls and slide the lumber into the
channels. Measures 7 ft. long x 1 3/4" wide x 1 1/2"
deep.
Color- Silver
$30.00 Add
To Cart
|
 |
8 ft. long galvanized steel horse stall chew guard CM58. (angle
steel) Stops destructive chewing on stall wood edges. Measures
8 ft. long x 1 1/2" wide both directions. Some people call
these chew guards or anti-chewing strips. Other people call these
anti-cribbing strips or guards. Galvanized 16 gauge steel with
pre-drilled holes.
Color- Galvanized Only
$30.00 Add
To Cart
|
 |
8 ft. long steel wall cap style chew guard CM59. (channel
steel) Stops destructive chewing on wood and gives your stall
a finished look by capping the edges of the lumber. Fits over
standard dimensional cut lumber. Will slide inside of our wall
channels CM54 for a great appearance where the wall channel and
wall cap come together. Galvanized 16 gauge steel with pre-drilled
holes.
Color- Galvanized Only
$30.00 Add
To Cart
|
 |
7 ft. long steel wall stiffener Model CM5. Wall stiffeners
are used for stall walls over 12 ft wide or for stalls that were
built using dimensional cut lumber instead of tongue and groove.
Locks the boards together and makes the stall wall much sturdier.
Each stiffener is 7 ft long, 3 inches wide and the strength gusset
is 1/2 inch deep. Made of 16 gauge galvanized steel with pre
drilled holes every 5 5/8 inch.
Color- Galvanized Only
$30.00 Add
To Cart
|
Click
Here for Assembly Instructions
|
Sliding Door Hardware Kit CM 84. Consists of door brackets,
door latch, bottom stay roller assembly, polyethylene roller
system for long life and 8 ft section of enclosed-top track to
keep dust and material from falling into the rollers and jamming
your door.
All mounting hardware included.
$189.00 Add
To Cart
|